Before you even begin your process of installing an aluminum fence, there are a few things that you should do. First, you should check the local fence codes, as well as, measure and plan out the area that you are intending on putting the fence.
Setting stakes with string lines is the first part of the actual installation process. You are going to want to measure out your stakes, put them in the ground and run lines between them.
When you start installing your fence you are going to want to start by digging all of your holes.
Once you have your holes you are going to want to set the corners and ends of the gate posts. After you have your corner posts installed you are going to start installing each of the sections one by one. As you go across the line installing each part you are going to want to make sure that you are putting concrete into the hole with each post. This is going to help your fence stay in place and overall have more stability. It’s also important to note that a good practice would be installing the fence trim a couple of inches above the ground so that you can take care of your lawn easier.
.
